AREXAL® - Pro - Ziegel
€70.81*
Available, delivery time: 1-3 days
AREXAL®-PRO-Brick is a permanent impregnation penetrating up to 20 cm deep (No chemicals or chlorides) - lasting protection for your building
AREXAL®-Pro-Brick strengthens brick surfaces and protects them against heavy wear as well as chlorides and aggressive liquids. The protection is vapor-permeable, durable, and acid-resistant.
AREXAL®-Pro-Brick is a surface sealing and protective treatment for susceptible brick surfaces, such as house walls, cellars, wells, and stone walls of all kinds. AREXAL®-Pro-Brick is also used for consolidating surfaces and binding dust during the grinding and polishing of stone floors and walls. The result is a very resistant and scratch-proof surface.
AREXAL®-Pro-Brick penetrates deeply into capillaries, micro-cracks, and pores. A chemical reaction between salts and minerals creates a very hard calcium silicate hydrate. Consequently, a crystalline structure forms, which prevents water penetration but allows the escape of vapors (diffusion). Since the protection penetrates deep into the concrete, it is insensitive to external influences like abrasion and impacts.
A treatment increases the durability (abrasion resistance) of new stone floors and walls by more than 35 percent and strengthens older, weather-exposed stones and walls. The treated surface becomes slightly water-repellent (hydrophobic) with the final treatment. For very moist material, pretreatment with other products from the AREXAL® series is recommended.
Applications
- Stones and walls
- Roads, bridges, tunnels
- Parking lots and garages
- Water supply and sewage systems
- Wine cellars
- Timbered houses
- Ports and surroundings
- Old vaults
- Agricultural silos
- Biogas plants
- Sawmills, paper mills
- Recycling and waste facilities
- Balconies, stairs
Benefits
- Easy and straightforward to apply
- Odorless
- Environmentally friendly
- Vapor-permeable
- Acid-resistant
- Single treatment
- Longer lifespan
- Reduced maintenance
- Dust binding
- Easier cleaning
Application:
AREXAL®-Pro-Brick is delivered ready for use and does not need to be mixed or diluted with other liquids. Shake the container before use. The surface to be treated must be free of dust, paint, or other coatings that could impair the material's absorbency.
Damage or visible cracks (>1.0 mm) should be repaired before treatment. Protect glass, aluminum, and polished or painted surfaces from etching. In case of splashes, immediately rinse the affected areas with water and, if necessary, clean with an alkaline solution.
The temperature during application and for the following 24 hours must be ≥ +5°C. Avoid direct sunlight during application.
For easy processing, use a standard low-pressure spray device or a roller. Apply the agent at least twice at intervals of 5–15 minutes between each application until complete saturation of the material is achieved. Note that the spray mist can spread very widely during application and can damage glass surfaces.
On horizontal stone surfaces, AREXAL®-Pro-Brick can be poured out and spread with a squeegee, brush, or mop. Avoid the formation of dry spots during treatment. Complete saturation is achieved after about 20–30 minutes. Remove residues, as otherwise shiny or white spots could form.
If you have further questions, please contact us!
More Product Information
| Datasheet | Download |
| Content: | 5 Liters |
|---|---|
| Recommended Tools: |
work gloves protective mask - FFP2 safety glasses pressure sprayer (water) |
Produkt Downloads
| Datenblatt | herunterladen |
Login